Net-X-Code and Avid MediaCentral Setup

Avid Media Composer 6Avid MediaCentral provides a convenient method to share media and projects among a group of Media Composer stations or other Avid products.  Drastic's Net-X-Code Server supports direct communication with Avid MediaCentral servers, include checkin, direct write and edit while capture (EWC) when using the Net-X-Convert module (file to file) or Net-X-SDI (SDI/IP to file).

Setting Up Net-X-Code Server for MediaCentral

Supported Platforms:  Windows 64 bit

(we may add support for macOS in the future, if there  is enough demand)

Interplay Requirements

  • MediaCentral Server installed and configured (note: Avid Interplay has been rebranded as MediaCentral, but many of the commands etc. below mention Interplay still)
  • MediaCentral Web Services installed and configured
    • If run on the main server, the ports must be changed from 80/443 to 81/444
    • This change must be reflected in the config below (IPWS_Notify_EndPoint)
    • The Firewall on the server must be configured to allow the server on these ports
  • Shared database on separate drive
  • Currently, the "project" folder must exist on Interplay
  • Shared storage setup, usually via UNC path
    • The MediaCentral server must be able to access the storage
    • The Net-X-SDI/Net-X-Code instance must be able to access the storage
    • Any Media Composer stations must be able to access the storage
    • The storage must be fast enough for the format being captured
  • Time of day on all systems must match. We recommend the use of Network Time Protocol (NTP)

Net-X-Code Requirements

Net-X-Code supports both converting directly into MediaCentral from any supported file format as well as recording directly into MediaCentral with support for Edit While Capture (EWC).  This requires selecting the Drastic AMT writer, and configuring the settings to match your MediaCentral environment.

 NetXCode AMT3 DDRSetup1

The setup variables are:

EWC_Enable - Enabled edit while record

IPWS_Notify_Enable - Notify a MediaCentral server (otherwise just write the MXF/AAF locally)

IPWS_Notify_EndPoint - The Name/IP and port of the Web service for Interplay

IPWS_Notify_Interval - How often to send the notifications in milliseconds (default:  5000)

IPWS_Notify_URI - (interplay://AvidWorkgroup/)  Where the interplay database web notification exists.  It will always starts with your interplay:// followed by the workgroup you want to use (e.g.  interplay://AvidWorkgroup/).  To this, the default project string below, or the project set from the Web UI, will specify where the file is to be added.  Please note, this project must exist, or the add will fail.

  • interplay://   this is the URL and must start the string
  • AvidWorkgroup/   this has to be an existing workgroup on the server

IPWS_DefaultProject - (Projects/Drastic)  Where to place the new clips in the database.  We automatically include the IPWS_Notify_URI and this setting specifies the project and bin strings.  The project specified here must exist on the MediaCentral before recording starts.  The format is

  • Projects/   this is the name of the projects folder on the server, it is made by default
  • <project>   the string following the projects folder is the user project name.  It must exist on the server.

So the final example URL that gets used would be the combination of IPWS_Notify_URI and IPWS_DefaultProject

interplay://AvidWorkgroup/Projects/Drastic

IPWS_Notify_User - User name to access MediaCentral

IPWS_Notify_Pass - Password to access MediaCentral

Setting Up Automatic Proxy

Net-X-Code can also generate and automatically check in a proxy file to MediaCentral, whenever you record or convert into it.  The auto proxy values are set up in the main config.xml/DDRConfig under VVW/Internal0. They are are very specific and must match Avid's recommendation exactly to be accepted.

ddrconfig avidamt proxy setup

These settings must be followed exactly:

proxycompressiontype = 875967041
proxydatarate = 200
proxydirectory =<some directory your interplay can see>
proxyfiletype = 217
proxyheight = 270
proxymode = 1
proxywidth = 480
 
The 217 file type indicates AMT.  The size must be 480x270 and the codec is h.264.  The data rate can be changed, but must be either 200 or 800 kb/sec.

 

Trademarks, Registered Trademarks, and Copyrights

 

Trademarks, Registered Trademarks, and Copyrights

Apple Inc. - Apple, the Apple logo, Final Cut, Final Cut Pro, Apple TV, iOS, iPad, iPhone, iPod touch, iTunes, Mac, Mac OS X, macOS, Shake, Final Cut Pro, ProRes, High Sierra, Mojave, M1, M2, and QuickTime are trademarks of Apple Inc., registered in the U.S. and other countries.
Avid Technology, Inc. - Avid Media Composer®, Avid MediaCentral®, Avid Interplay®, and Avid NewsCutter® are either trademarks or registered trademarks of Avid Technology, Inc. or its subsidiaries in the United States and/or other countries.
Drastic Technologies, Ltd. – trademarks specified here.
Microsoft Corporation – Microsoft: Windows®, Video For Windows (VFW), DirectShow, Microsoft, Skype, Microsoft Azure, Microsoft Teams, Wave Mapper, Microsoft, Windows NT|2000|XP|XP Professional|Server 2003|Server 2008 |Server 2012, Windows 7, Windows 8, Media Player, Media Encoder, .Net, Internet Explorer, SQL Server 2005|2008|2012|2014, Windows Media Technologies and Internet Explorer are trademarks of Microsoft Corporation.
All other trademarks are the property of their respective owners.

 

Image

For more than two decades, Drastic™ has been developing cutting edge digital video solutions for television, post production and sports broadcasting, from real time web delivery to 8K broadcast.

We offer standalone software for the end user or enterprise, integrated solutions for automated workflows, and OEM tools for custom applications or branded devices.

Contact Us

Address:
523 The Queensway, Suite 201
Toronto, ON
M8Y 1J7, Canada

Phone: +1 (416) 255 5636

Email: sales@drastictech.com

Fax: + 1 (416) 255 8780

Follow us on Social Media